sensor

Top10 Cadence dual blades / bicycle hub speed sensor Where to buy ?

  • Magene S3+ Cycling Cadence Or Speed Sensor - ANT+ and Bluetooth 4.0 Compatible - Wireless Sensor for Bikes - Compatible with Zwift, Garmin, & More
    Use the Magene S3+ sensor to accurately track cycling cadence or speed in real-time. Connects to your ANT+ & Bluetooth 4.0 devices to provide key data in your favorite cycling apps. Check out the manual for helpful setup tips. Use the Magene Utility App for initial setup. Then the S3+ is compatible with most ANT+ & Bluetooth 4.0 devices. Works with Zwift, Garmin, Bryton, iGPSPORT, Onelap, BKool, TACX, and more. Bluetooth connection works with smartphones & bike computers. Send us a message on Amazon if you'd like to confirm compatibility with your device. Lightweight design Installs easily on your bike's crank arm or wheel hub with the included rubber-elastic rings. Connect the sensor to the crank arm for cadence tracking, or to the wheel hub for speed measurements. Note: Sensor can't be installed on the wheel of spin bikes, so speed tracking is not compatible with spinning bikes. Sensor can be used as a cadence or speed sensor. Just reinsert the battery to quicky changes modes. The green light means speed mode, and the red indicates cadence tracking. Want to track both at once? Grab a 2 pack and record both cadence and speed. Simultaneously record data on multiple devices with this cadence/speed sensor. Data transmits in 3 seconds to keep you informed while riding. Track all your rides with the 400-500h battery life. IP66 rating makes this sensor water and dust-proof.
  • Wahoo RPM Cycling Cadence Sensor
    Track and capture real-time cycling cadence on your bike computer or smartphone with compatible training apps. Lightweight and easy to install – NO MAGNETS. Attaches to your bike’s crank arm or shoe (mounts included). Integrated with Bluetooth and ANT+, RPM sensors connect to smartphones, tablets, and bike computers by Wahoo, Polar, Garmin, and more. Record workout data with the Wahoo Fitness app and automatically upload data to your favorite training platform like Strava. Works with 50+ Smartphone Apps including Wahoo Fitness, Zwift, Trainerroad, Sufferfest, MapMyRide, Komoot, RideWithGPS, Cyclemeter, Peloton (iOS only), Rouvy, Fulgaz, Kinomap
  • Garmin 010-12843-00 Speed Sensor 2, Bike Sensor to Monitor Speed, Black
    The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin connect online community or self-calibrate with an edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. Ant+ connectivity and Bluetooth Low energy technology Let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors. The odometer feature tracks your distance to help plan for bicycle maintenance.
  • TUSY 2-in-1 Cycling Speed Sensor Cadence Sensor for Spin Bike, Bluetooth/ANT+ Magnetless Waterproof RPM Sensor for Exercise Bike
    🦄🦄【2-in-1 design】Blth 4.0 & ANT+ technology, Tracking real-time data on your bike computer or fitness apps (for 2 functions perform at same time, you need to buy 2). 🦄🦄【Tie up in seconds】NO magnets needed, the mini sensor tied to your bike’s crank arm(cadence mode) or wheel hub(speed mode) within 10s. 🦄🦄【Compatibility ✔】The cadence speed sensors compatible with the most mainstream fitness APPs, such as Wahoo Fitness, Zwift, Cyclemeter, Peloton, etc. 🦄🦄【Double Battery Life】Cell battery included with life of up to 600 hours & wireless signal strength up to 20 feet. 🏆🍄KINDLY NOTE - ✨DON’T use magnet based sensor on spinning bikes as the magnetism will interfere the signal of the sensor and causing inaccurate results.✨This is an updated sensor which is capable to be switched between CADENCE/SPEED modes.
  • Garmin Speed Sensor 2 and Cadence Sensor 2 Bundle, Bike Sensors to Monitor Speed and Pedaling Cadence
    The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. The odometer feature — for the speed sensor only — tracks your distance to help plan for bicycle maintenance.
  • CYCPLUS Cycling Speed and Cadence Sensor Bluetooth & ANT+ Wireless Bike Cadence Sensor Speed IP67 Waterproof- C3 X 2
    SPEED SENSOR & CADENCE SENSOR- Package include: 2 pcs speed &cadence, you can use the speed and cadence sensor at the same time. BLUETOOTH & ANT+ MULTI-PROTOCOL: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+ ULTRA SMALL DESIGN & LONG ENDURANCE: SIZE only 38mm×29.5mm×9.5mm & WEIGHT only 9.2g. Not affect bike appearance and increase cycling burden.300 hours using time & 300 days standby time. It will enter the SLEEP MODE when not in motion. DUAL-MODE SENSOR: Quickly switch between cadence and speed sensor modes by toggling switch to different position. EASY INSTALLATION: Easily attach to your bike with included ELASTIC and DOUBLE-SIDED TAPE, no magnet or calibration needed. Excelsior quality and innovative design help you ride scientifically and healthily. Mounts to any bike's wheel hub, these sensors are easy to install, maintain and move between bikes.
  • Wahoo RPM Speed Sensor for iPhone, Android and Bike Computers
    Track and capture outdoor cycling speed on your bike computer or smartphone with compatible training apps. Lightweight and easy to install– NO MAGNETS. Attaches to your bike’s wheel hub (mounts included). Integrated with Bluetooth and ANT+, RPM sensors connect to smartphones, tablets, and bike computers by Wahoo, Polar, Garmin, and more. Record workout data with the Wahoo Fitness app and automatically upload data to your favorite training platform like Strava. Works with 50+ Smartphone Apps including Wahoo Fitness, Zwift, Trainerroad, Sufferfest, MapMyRide, Komoot, RideWithGPS, Cyclemeter, Peloton (iOS only), Rouvy, Fulgaz, Kinomap
  • CooSpo Cadence Sensor Bluetooth4.0 ANT+ Cycling Cadence Bike Speed Sensor Wireless RPM Bicycle Cadence Sensor for Bike Computer Rouvy, Zwift, Openrider, Peloton
    RPM Cycling Sensor - Track and capture real-time cycling cadence or speed data on your bike computer or smartphone with compatible training apps Cadence or Speed Sensor – Reput the battery, it will switch between rpm cadence and speed mode. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. Speed sensor mounts on the axle with red LED light up for three seconds on panel. Two modes CAN NOT function at the same time Bluetooth & Ant+ Connectivity - Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Waterproof IP67 App Compatible & Battery Life - Work with popular training app including Zwift, Rouvy, RidewithGPS, Peloton, Openrider, TrainerRoad. CR2032 replaceable coin cell battery. Lasts up to 12 months. No recharging Lightweight and Non-Magnetic – Total weight is 9.5g only, easy to install. It comes with rubber pad and different size O-ring to help you better fix it on bike. Wireless and non-magnetic, it wouldn't be recommended to use on SPIN bikes
  • Garmin Cadence Sensor 2, Bike Sensor to Monitor Pedaling Cadence
    The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. ANT+ connectivity and BLUETOOTH Low Energy technology let you send cadence data to our Garmin Connect online community and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors. Compatible with multiple Garmin devices.
  • POWR LABS RPM Bike Cadence Sensor, Bluetooth & ANT+ Cycling Cadence Sensor for Spin Bikes - Made for Zwift, Wahoo Kickr, Garmin Computers & Spin Bike Accessories - Cadence Sensor for Stationary Bike
    SMALLER & LIGHTER: Who wants a bulky, heavy ant cadence sensor? Nobody! That's why we focused on developing the smallest and lightest spin bike cadence monitor on the market. ACCURACY IN ALL WEATHER: Our class leading sensors accurately track and capture your cycling cadence in real-time via Bluetooth 5.0 or ANT+ connectivity. With an IP67 rating, this sensor is WATER AND DUST RESISTANT and performs in all weather. THREE EASY INSTALL OPTIONS: Installs directly on the bike crank with patented 3M adhesive tape or removable elastic bands, as well as directly onto your cycling shoe if you want to use it across multiple bikes. Works as an indoor bike cadence sensor or outdoor cycling cadence sensor bluetooth. COMPATIBLE With Bike APPs: Quickly pairs wirelessly via Bluetooth to your favority bike apps such as Zwift, Wahoo, Polar, Garmin, Strava, Trainer Road and more. COMPATIBLE With BIKE COMPUTERS & INDOOR BIKE TRAINERS: Quickly pairs wirelessly via ANT+ to your favorite bike hardware and computers such as Garmin cadence sensor for Edge, Wahoo Cadence Sensor for ELMNT and KICKR, Polar and more.